In today’s evolving Thai architecture scene, client expectations go beyond beauty and functionality. Acoustic comfort and noise control are fast becoming essential standards for high-quality buildings — whether it’s a luxury condo in Bangkok, a resort in Phuket, or a new hospital in Chiang Mai.
However, we still see beautifully designed buildings suffering from poor sound environments because acoustic planning was treated as a secondary issue. At Geonoise Thailand, we’ve seen how proactive noise and vibration planning from the start of a project can prevent problems before they arise. Here are five common mistakes Thai architects make when acoustics are not integrated early — and how to avoid them.
1. Choosing the Wrong Materials for Sound Control
Issue: Materials are often selected for thermal performance or aesthetics, but not for sound. For example, thin gypsum walls or unsealed glass panels may look modern but allow noise to pass through easily.
Solution: Understand the sound insulation ratings of materials, such as STC or RW values, and consult an acoustic expert to select the right components for the noise levels expected.
2. Ignoring Building Services Noise
Issue: Mechanical noise from air conditioning units, water pumps, elevators, or generators can severely disturb spaces that need quiet, like bedrooms, classrooms, or consultation rooms.
Solution: Plan M&E systems with acoustics in mind — use vibration isolation, strategic placement, and proper sound insulation from the design stage.
3. Poor Room Layout Without Acoustic Zoning
Issue: Quiet spaces (like meeting rooms or bedrooms) are sometimes located next to noisy zones (kitchens, trash rooms, lift lobbies) without proper separation.
Solution: Use acoustic zoning — place noisy and quiet areas strategically, with buffer zones or sound-rated partitions in between.
4. Underestimating Low-Frequency Noise
Issue: Bass-heavy sounds from music, rooftop machinery, or subwoofers can penetrate walls and travel far, disrupting even well-insulated rooms.
Solution: Use noise modeling tools and select high-mass materials or vibration-damping designs to control low-frequency sound.
5. Bringing in an Acoustic Expert Too Late
Issue: Consultants are often called in after construction or when residents complain — fixing issues at this stage is usually expensive and limited.
Solution: Engage an acoustic consultant during the conceptual or schematic design phase. Early involvement helps resolve potential problems while saving time and cost.
Conclusion
Acoustic comfort is no longer optional — it’s a new benchmark for quality buildings. If you prioritize sound early in your design process, you’ll add real value to your architecture and strengthen your professional reputation.
At Geonoise Thailand, we support architects with precision tools, ISO17025-compliant services, and real-world experience. We ensure every decibel is managed effectively.
Want expert support from the start of your project?
